---
title: "PPWR declaration of conformity: what must it contain?\nWho signs it, and who should receive it?"
description: "Since 12 August 2026, each packaging type sold in the EU, even if made outside it, needs a declaration of conformity: who signs, its 8 headings, what to send buyers."
canonical: https://projetcelsius.com/en/blog/ppwr-eu-declaration-of-conformity/
author: "Sébastien Pierfederici"
datePublished: 2026-09-28
dateModified: 2026-10-31
language: en
translationOf: https://projetcelsius.com/blog/declaration-conformite-ppwr-emballages/
---

# PPWR declaration of conformity: what must it contain? Who signs it, and who should receive it?

**Author**: Sébastien Pierfederici
**Published**: 2026-09-28
**Updated**: 2026-10-31
**Section**: Practical guide
**Canonical URL**: https://projetcelsius.com/en/blog/ppwr-eu-declaration-of-conformity/
**French original**: https://projetcelsius.com/blog/declaration-conformite-ppwr-emballages/
**Source**: Projet Celsius (https://projetcelsius.com/en/), a climate strategy consultancy of engineers and PhDs based in Paris and Marseille.

> The [EU declaration of conformity](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040) for a packaging type contains **a number, 8 headings and a signature**, under Annex VIII of the EU Packaging and Packaging Waste Regulation (PPWR). It is signed by the **manufacturer**, in principle **the brand shown on the packaging**, and not the company that produces it. In 2026, it mainly attests to **heavy metals and PFAS**, and to weight under the 1994 rule. A customer who asks for a "PPWR certificate" or "attestation" expects, depending on the customer's role, a copy of the declaration or the supplier's evidence.

## Key takeaways

- Since August 2026, **each packaging type has its own declaration**, signed before it is sold.
- **The manufacturer signs it**: in principle the brand shown on the packaging.
- In 2026, the declaration mainly attests to compliance on **heavy metals and PFAS**.
- A request for a "PPWR attestation" calls for **a copy of the declaration or supplier evidence**, depending on the customer.

Since **12 August 2026**, every packaging type placed on the European market must have an **EU declaration of conformity**, signed before it is placed on the market by the party that [Regulation (EU) 2025/40](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040), the Packaging and Packaging Waste Regulation (PPWR), calls the manufacturer. It follows the model in **Annex VIII**: a number, **8 headings** and a signature. The manufacturer uses it to attest that the packaging meets the requirements of Articles 5 to 12 that already apply, and keeps it for **5 years**, or 10 years for reusable packaging.

The request often comes from a customer asking for a "PPWR attestation" or "the DoC" (declaration of conformity) for your packaging. The answer depends first on **the brand the packaging carries**, which identifies the manufacturer, and then on what the Regulation currently requires you to prove: mainly **substances**, with the 1994 rules still applying to weight and volume.

## What is the PPWR EU declaration of conformity (DoC)?

It is the document in which the manufacturer attests that **compliance with the requirements of Articles 5 to 12 has been demonstrated** (Article 39). Those Articles cover, among other things, substances, recyclability, recycled content, compostability, minimisation, reuse and labelling. The declaration comes at the end of a procedure set out in Annex VII, **internal production control**: the manufacturer assesses its own packaging and declares on its sole responsibility that it complies.

### A document required since 12 August 2026

The Regulation has applied since 12 August 2026 (Article 71). Before placing packaging on the market, the manufacturer draws up the **technical documentation**, then the declaration (Article 15). According to the [Commission FAQ](https://environment.ec.europa.eu/publications/faq-packaging-and-packaging-waste-regulation-ppwr_en) of August 2026, a requirement with no date of its own must be assessed **from that date**. Packaging already produced and in stock before 12 August 2026 does not have to be destroyed or relabelled: its number and the manufacturer's contact details may appear in an **accompanying document**.

### No certificate, no filing, no CE marking

Internal control is carried out **without a notified body**: no third party issues a certificate. A document titled "PPWR certificate" therefore has no value of its own, as our article on [supplier evidence and the technical file](https://projetcelsius.com/en/blog/ppwr-technical-documentation-supplier-evidence/) explains. The declaration is **filed nowhere**: the manufacturer does not have to notify the authorities of the countries where it sells, and they contact it if there is an inspection. The PPWR provides for **no CE marking** on packaging: any CE marking on it relates only to the packaged product (recital 109).

> **Manufacturer or producer?** The manufacturer under the PPWR is responsible for the conformity of the packaging. The producer, often the same company but not always, pays the EPR fee (éco-contribution) under [extended producer responsibility (EPR) for packaging](https://projetcelsius.com/en/blog/france-epr-professional-packaging-2027/) in each country where the packaging becomes waste, and in France obtains a [unique identifier (identifiant unique, or IDU)](https://projetcelsius.com/en/blog/french-epr-unique-identification-number/).

## Who signs it: manufacturer, importer or authorised representative?

The manufacturer, and only the manufacturer: by signing, it **takes responsibility** for the conformity of the packaging (Article 39). The word can mislead, because this manufacturer **is not necessarily the company that produces the packaging**. According to the [Commission guidance of 10 June 2026](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52026XC03084), there is **only one manufacturer** in each supply chain.

### The brand owner, in principle

Article 3 defines the manufacturer as the party that manufactures the packaging, or **has it designed or manufactured under its own name or trademark**. The Commission FAQ draws 4 cases from this:

- For packaging that carries a name or trademark, the manufacturer is **the trademark holder**, even if a contract packer fills it and a thermoforming company produced it. The manufacturer of a caterer's tray is the caterer.
- For standard unbranded packaging, such as a cardboard box or stretch film sold by the roll, it is **the physical manufacturer**. An e-commerce seller that attaches a shipping label to a cardboard box does not become its manufacturer.
- For bespoke unbranded packaging, it is **the company that orders it** and sets its specifications.
- For a micro-enterprise, it is **its supplier** that signs the declaration, as soon as the supplier is established in the Union (Article 15(12)). Article 3 makes the supplier the manufacturer in the general sense of the Regulation only if it is in the same country. Our [article on micro-enterprises](https://projetcelsius.com/en/blog/ppwr-small-businesses-obligations/) explains this discrepancy between the 2 Articles.

The tool below applies these rules to your packaging, then shows what the other operators in the chain do.

### Importer, distributor, supplier and authorised representative

The **importer** of packaging or a packaged product from a third country checks that the foreign manufacturer has drawn up the technical documentation, **keeps a copy of the declaration** and puts its name and address on the packaging (Article 18). The **distributor** checks the labelling, the manufacturer's and importer's details and the producer's registration in the [producer register](https://projetcelsius.com/en/blog/packaging-epr-europe-compliance/), **without having to hold the declaration** (Article 19). Either becomes the manufacturer if it sells under **its own name or trademark**, or modifies the packaging so that its conformity is compromised (Article 21).

The **supplier** of packaging or materials passes on to the manufacturer all the information and documentation needed, and **cannot refuse** to do so (Article 16). An **authorised representative** appointed in writing may draw up the declaration and keep it available to the authorities, according to the Commission FAQ, but preparing the technical documentation cannot be entrusted to it (Article 17). It is distinct from the [EPR authorised representative](https://projetcelsius.com/en/blog/french-epr-authorised-representative/) under Article 45, which represents the producer in a country where it sells without being established there. In every case, **responsibility cannot be transferred by contract**.

## Annex VIII model structure: what must the declaration contain?

The model sets the order and titles of the headings, which the opening graphic shows completed for a tray. It provides for **no official form** to download: the templates in circulation reproduce its structure, and it is for the manufacturer to check that no heading is missing.

### One declaration per packaging type

Annex VII requires **one declaration per packaging type**, meaning, according to the FAQ, per format or manufacturing batch. Bottles of different sizes containing the same product may share a declaration if size does not affect their conformity. The declaration covers **the complete packaging unit**, for example the bottle, its cap and its label, describing each component.

The number in heading 1 repeats the one on the packaging, a **type, batch or serial number** at the manufacturer's choice (Article 15). For a yoghurt pot, the FAQ allows that number to appear on a single component. Transport packaging has **its own declaration for each item**: pallet, pallet collar, film and strapping are each assessed separately. Only transport packaging made to measure for medical devices used in an industrial or healthcare setting is exempt from the documentation and the declaration (Article 15(11)). Our article on [packaging for medicines and medical devices](https://projetcelsius.com/en/blog/ppwr-medicines-medical-devices/) sets out the sector's other exemptions.

### Headings 6 and 7: standards and notified body

Standards EN 13427 to EN 13432 under the former Directive no longer give a presumption of conformity and serve only as guidance, **except EN 13428** on source reduction, **until the end of 2029**. Heading 6 therefore lists the standards and test methods applied in practice. Heading 7 remains **not applicable**, since no notified body is involved. A laboratory may carry out the tests on the manufacturer's behalf without the heading changing.

### Several acts, one language, one update

Plastic food packaging also falls under Regulation (EU) No. 10/2011, which requires its own declaration. **A single declaration** may cover the 2 acts, citing each with its publication reference (Article 39) and **distinguishing the packaging from the packaged product**. It is drawn up or translated **into the language of each country where the packaging is made available**, meaning French for France. Finally, it stays "continuously" up to date: a change of material, supplier or standard may require **a new assessment**.

> Each packaging format or batch has its own declaration, which covers the complete unit, from the bottle to its cap and label.

## What does the declaration attest to in 2026?

The declaration covers Articles 5 to 12, but **each requirement has its own date**, often tied to an act that the Commission has yet to adopt. As at 18 October 2026, it mainly attests to **substances**, and to weight and volume reduction under the 1994 rules.

### Heavy metals and PFAS, required from 2026

The sum of **lead, cadmium, mercury and hexavalent chromium** remains capped at **100 mg/kg** for all packaging, and this limit is now demonstrated in the technical documentation (Article 5). The derogations granted to glass and to plastic crates and pallets remain in force. Since 12 August 2026, food-contact packaging must also meet the **limits on per- and polyfluoroalkyl substances (PFAS)**, with no sell-through period: 25 ppb for each targeted PFAS, 250 ppb for their sum and 50 ppm for total PFAS. Our article on [PFAS in food packaging](https://projetcelsius.com/en/blog/pfas-food-packaging-ppwr-limits/) explains the method, which starts with a **total fluorine test**.

### Weight and volume: the 1994 rule until the end of 2029

Article 10 of the PPWR, which requires **weight and volume** to be reduced to the minimum necessary, applies only from **1 January 2030**. Minimisation does not wait for that date, however. Article 70 keeps the essential requirement of [Directive 94/62/EC](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31994L0062) (Annex II, point 1, first indent) in force until **31 December 2029**. It already requires weight and volume to be limited to the minimum necessary to maintain the required level of safety, hygiene and acceptability for the packaged product and for the consumer. Standard EN 13428 gives a presumption of conformity until that date. From 2030, marketing and consumer acceptance will no longer justify excess weight, according to the Commission.

### Recyclability, recycled content, labelling: later

Article 6 requires recyclable packaging, but its criteria depend on a delegated act expected **by 1 January 2028 at the latest**. Until then, the Commission asks for compliance with the 1994 Directive and standard EN 13430:2004, **without a recyclability assessment** under the PPWR. The [recycled plastic content target](https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/) applies from 1 January 2030 at the earliest, and its calculation method has not been adopted. How to prove it is the subject of our article on [third-party audits of recycled content](https://projetcelsius.com/en/blog/ppwr-recycled-content-verification/). The act on the harmonised label, due on 12 August 2026, is [announced for the second quarter of 2027](https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/19243-Packaging-and-packaging-waste-new-Commission-implementing-rules-on-harmonised-labels_en). Each deadline requires **the declaration to be updated**: the [PPWR timeline](https://projetcelsius.com/en/blog/ppwr-timeline-deadlines/) and our article on [packaging eco-design](https://projetcelsius.com/en/blog/packaging-eco-design-ppwr-2030/) set out these stages.

## A customer asks for a "PPWR certificate" or "attestation": what to send

The word "attestation" does not appear in the Regulation. The declaration of conformity is made for **the authorities**: the manufacturer keeps it available to them and gives them a copy on request (Annex VII). The only operator in the chain that must hold a copy is the importer (Article 18). The same Article requires the importer to ensure that the packaging is accompanied by the required documents, without naming them, and French customs states that packaging must be accompanied by a declaration. These 2 wordings explain many of the requests. What a customer can expect depends mainly on **its own role**.

### Your customer is the manufacturer

This is the most common case: you supply trays, labels or films to a brand that fills them. You do **not sign a declaration**, since you are not the manufacturer, but you owe it **all the information and documentation** it needs (Article 16):

- A composition declaration naming the material and grade of each element, and stating the heavy metal content and, for food contact, the PFAS or total fluorine content.
- Test reports that clearly cover your production site, the grade supplied and an identified period, and not an unreferenced sample.
- The elements useful for forthcoming requirements, such as recycled content or design for recycling, where you have them.

These documents feed its technical documentation, as our article on [supplier evidence and the technical file](https://projetcelsius.com/en/blog/ppwr-technical-documentation-supplier-evidence/) explains. A "PPWR compliance statement" signed by the supplier **does not replace** the manufacturer's declaration: it does not commit the manufacturer on its behalf. The same rule applies to a contract packer that fills products under a distributor's brand: the distributor, as trademark holder, signs.

### Your customer is an importer or distributor

The **importer** must make sure that you, as a manufacturer established outside the Union, have drawn up the documentation and the declaration, and it **keeps a copy** for 5 or 10 years (Article 18): giving it the declaration is part of normal practice. The **distributor** does not have to hold it, but may ask for it for reassurance. In the 2 cases, the **declaration is shared**, whereas the technical documentation, which contains the drawings and formulas, stays with the manufacturer, which protects its confidentiality.

## How long must it be kept, and who checks it?

The manufacturer keeps the declaration and documentation for **5 years** after single-use packaging is placed on the market, and **10 years** for [reusable packaging](https://projetcelsius.com/en/blog/ppwr-reuse-targets-2030/) (Article 15). On a reasoned request from an authority, it provides the documents **within 10 days**, in electronic format. Each year, the authorities endeavour to check **a proportion of the declarations**, selected on a risk basis (Article 39).

In France, the competent authority is the **direction générale de la prévention des risques** (DGPR), the French risk prevention directorate, according to [French customs](https://www.douane.gouv.fr/actualites/entree-en-vigueur-du-nouveau-reglement-relatif-aux-emballages). Customs is not the market surveillance authority for packaging, but it may suspend the release of imported goods in order to refer the matter to the DGPR. A missing or incorrectly drawn-up declaration is **formal non-compliance** (Article 62): the State first requires the non-compliance to be brought to an end, and prohibits sale or orders withdrawal only if it persists. The Commission asks the authorities to support companies rather than penalise them straight away.

National penalties must be set **by 12 February 2027 at the latest** (Article 68). In France, they go through the [bill adapting French law to EU law](https://www.assemblee-nationale.fr/dyn/17/dossiers/DLR5L17N53140), adopted by the Senate on 18 February 2026 and pending before the National Assembly. As at 18 October 2026, **no PPWR-specific penalty** is therefore in force; what already applies, from withdrawal from the market to the EPR fine, is set out in our article on [PPWR penalties](https://projetcelsius.com/en/blog/ppwr-penalties-non-compliance/). This timetable does not change the obligation, and our article on the [PPWR compliance audit](https://projetcelsius.com/en/blog/ppwr-compliance-audit/) helps scope this work packaging by packaging.

At Projet Celsius, the question we find useful before signing is "**who is the manufacturer of this packaging?**". It is settled reference by reference, according to the brand the packaging carries, and it decides everything else: who signs, who provides the evidence, who keeps the copy. We then recommend **starting with what has been required** since 12 August 2026, heavy metals, PFAS and weight under the 1994 rules, rather than with the 2030 criteria that the Commission has not yet published. This is how we run our [PPWR support](https://projetcelsius.com/en/services/ppwr-compliance/); the other options, in-house or external, are compared in our article on [how to get support towards PPWR compliance](https://projetcelsius.com/en/blog/ppwr-compliance-support/).

## Key takeaways

- Since 12 August 2026, every packaging type has an **EU declaration of conformity**, drawn up before it is placed on the market using the Annex VIII model.
- It is signed by the **manufacturer within the meaning of the PPWR**, in principle the brand shown on the packaging, or the physical manufacturer of a standard unbranded cardboard box.
- The importer keeps a copy, the distributor checks the details, and the supplier passes on its evidence and cannot refuse.
- In 2026, it mainly attests to **heavy metals and PFAS**, and weight and volume reduction is judged under the 1994 rule **until the end of 2029**.
- A "PPWR attestation" does not exist in the text: a manufacturer customer expects evidence, an importer expects a copy of the declaration.

[Our PPWR guide](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/) places the declaration within the Regulation as a whole, and [our test of which companies are affected](https://projetcelsius.com/en/blog/ppwr-who-is-affected/) helps you establish your role before signing.

## Frequently asked questions

### Do I need a PPWR declaration of conformity for every package?

You need one per packaging type, meaning per format or manufacturing batch. Packaging of different sizes containing the same product may share a declaration if size does not affect conformity. The declaration covers the complete unit, bottle, cap and label, and each distinct item of transport packaging, whether pallet, film or strapping, has its own.

### Must my packaging supplier provide a declaration of conformity?

Only if it is itself the manufacturer under the PPWR, for example for a standard unbranded cardboard box, or if you are a micro-enterprise and the supplier is established in the Union (Article 15(12)). Otherwise, you sign. Your supplier must, however, provide you with all the necessary information and documentation, and cannot refuse (Article 16).

### What is a "PPWR attestation"?

Regulation (EU) 2025/40 does not recognise this document. It provides for an EU declaration of conformity, signed by the manufacturer and intended for the authorities, and for technical documentation that proves it. A customer who asks for an "attestation" expects either a copy of the declaration, if it imports or distributes the packaging, or the evidence under Article 16, if it is the manufacturer itself.

### Do I need to submit the declaration to a public authority?

No. The PPWR provides for neither filing nor registration of the declaration, and the manufacturer does not have to notify the authorities of the countries where it sells. It keeps the declaration and technical documentation available for 5 or 10 years and provides them within 10 days on a reasoned request. In France, the competent authority is the DGPR.

### Is there an official PPWR declaration of conformity template?

The only official model is the text of Annex VIII to Regulation (EU) 2025/40: a declaration number, 8 headings and a signature block. Neither the Commission guidance of 10 June 2026 nor its August 2026 FAQ provides a form to complete. Templates published online reproduce its structure, and it is for the manufacturer to check that they omit no heading.

### Does packaging for medicines or medical devices need a declaration of conformity?

Yes. It benefits from targeted exemptions, on recyclability (Article 6(11)) and recycled content (Article 7(4)), but the declaration and technical documentation have been required since 12 August 2026, with the 100 mg/kg heavy metal limit and the 1994 rule on weight and volume. Only transport packaging made to measure for certain medical devices is exempt.

## Sources

- European Parliament and Council, [Regulation (EU) 2025/40 of 19 December 2024 on packaging and packaging waste](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040), OJ L of 22 January 2025: Articles 3, 5 to 12, 15 to 19, 21, 38, 39, 62, 68, 70 and 71, Annexes VII and VIII, EUR-Lex.
- European Commission, [communication C/2026/3084, guidance document concerning Regulation (EU) 2025/40](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52026XC03084), OJ C of 10 June 2026: points 2 (manufacturer), 6 (recyclability) and 10 (minimisation), EUR-Lex.
- European Commission, DG Environment, [Packaging and Packaging Waste Regulation, Frequently Asked Questions](https://environment.ec.europa.eu/publications/faq-packaging-and-packaging-waste-regulation-ppwr_en), second edition, August 2026: questions II.5, II.6, X.1 to X.11, XV.1 to XV.14 and XVI.1.
- European Parliament and Council, [Directive 94/62/EC of 20 December 1994 on packaging and packaging waste](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31994L0062): Article 9 and Annex II, kept in force by Article 70 of Regulation (EU) 2025/40 until 31 December 2029, EUR-Lex.
- Direction générale des douanes et droits indirects (French customs), ["Entrée en vigueur du nouveau règlement relatif aux emballages" (entry into force of the new packaging regulation)](https://www.douane.gouv.fr/actualites/entree-en-vigueur-du-nouveau-reglement-relatif-aux-emballages), August 2026: competent authority and role of customs. The page is in French.
- French National Assembly, [file on the bill containing miscellaneous provisions adapting French law to EU law](https://www.assemblee-nationale.fr/dyn/17/dossiers/DLR5L17N53140), adopted by the Senate on 18 February 2026. The page is in French.
- European Commission, [initiative on harmonised packaging labelling](https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/19243-Packaging-and-packaging-waste-new-Commission-implementing-rules-on-harmonised-labels_en), adoption expected in the second quarter of 2027 (page updated on 19 October 2026).
