---
title: "Does the PPWR apply to medicines and medical devices?"
description: "Since 12 August 2026, medicine and medical device contact packaging is exempt from recyclability and recycled plastic rules; outer and shipping cartons are not."
canonical: https://projetcelsius.com/en/blog/ppwr-medicines-medical-devices/
author: "Sébastien Pierfederici"
datePublished: 2026-09-30
dateModified: 2026-09-30
language: en
translationOf: https://projetcelsius.com/blog/ppwr-medicaments-dispositifs-medicaux/
---

# Does the PPWR apply to medicines and medical devices?

**Author**: Sébastien Pierfederici
**Published**: 2026-09-30
**Section**: Regulation
**Canonical URL**: https://projetcelsius.com/en/blog/ppwr-medicines-medical-devices/
**French original**: https://projetcelsius.com/blog/ppwr-medicaments-dispositifs-medicaux/
**Source**: Projet Celsius (https://projetcelsius.com/en/), a climate strategy consultancy of engineers and PhDs based in Paris and Marseille.

> [Regulation (EU) 2025/40](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040), known as the Packaging and Packaging Waste Regulation (PPWR), covers healthcare product packaging like other packaging, with targeted derogations. **Packaging in contact** with medicines, medical devices and in vitro diagnostic medical devices (IVDs) is exempt from **recyclability** and **recycled plastic content** requirements, under precise conditions and with reviews planned by 2032 and 2035. Outer cartons, grouped packaging boxes and logistics, however, remain **subject to the general rules**, including the declaration of conformity and minimisation.

## Key takeaways

- **The packaging regulation (PPWR)** has applied to healthcare products since 12 August 2026.
- **Packaging in contact with the product** is exempt from recyclability and recycled plastic content requirements.
- **Outer cartons and grouped packaging boxes** often remain covered, unless their necessity is demonstrated.
- **Inventory every packaging level** before the exemption reviews in 2032 and 2035 take place.

[Regulation (EU) 2025/40](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040), known as the Packaging and Packaging Waste Regulation (PPWR), has applied to healthcare product packaging since **12 August 2026**, just as to all other packaging: Article 2 covers **all packaging, regardless of the material used**. Medicines, medical devices and in vitro diagnostic medical devices (IVDs) benefit from **targeted derogations**. The 2 main derogations concern packaging in contact with the product, exempting it from **recyclability** requirements and **recycled plastic content** thresholds. The rest of the regulation applies, particularly the EU declaration of conformity and substance limits.

For a pharmaceutical company, medical device manufacturer or healthcare establishment, the rules therefore need to be read separately **for each packaging item**: a **tablet blister** has a different status from the **outer cardboard carton around it** or the transport box sent to the pharmacy. [The general PPWR guide](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/) covers the rest of the regulation.

## What counts as healthcare product packaging under the PPWR?

The regulation draws on definitions in pharmaceutical and medical device law that regulatory teams already know.

### Immediate packaging, outer packaging and transport packaging

A medicine's **immediate packaging** is the container in direct contact with it: a blister, bottle, tube, ampoule or sachet. **Outer packaging** surrounds the immediate packaging: in practice, it is the cardboard carton bearing mandatory information and containing the leaflet. These 2 definitions come from Article 1 of [**Directive 2001/83/EC**](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32001L0083). The PPWR refers to them and adds its own categories: grouped packaging, such as a box of 10 cartons, and **transport packaging**, the crate and pallet sent to the wholesaler.

### Contact-sensitive packaging

The derogations rely on the concept of **contact-sensitive packaging**, which Article 3 defines by the category of the packaged product. Packaging is contact-sensitive when it is intended for a product covered by a list of texts. These include Directive 2001/83 for human medicines, Regulation (EU) 2019/6 for veterinary medicines, [Regulation (EU) 2017/745](https://eur-lex.europa.eu/eli/reg/2017/745/oj) for medical devices and Regulation (EU) 2017/746 for IVDs. The [Commission FAQ](https://environment.ec.europa.eu/publications/faq-packaging-and-packaging-waste-regulation-ppwr_en) equates it, for medical devices and medicines, with **packaging in immediate contact** with the product.

### Infusion bags and pre-filled syringes

The [Commission guidance](https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084), published in the Official Journal of the European Union on 10 June 2026, resolves a common case. An **intravenous bag or syringe**, even pre-filled with a medicine or IV solution, **is an integral part of the product** and is not packaging under the PPWR. Its overpackaging and the box grouping these items, however, fall under the general packaging definition.

### The manufacturer that owns the brand

The PPWR assigns responsibility for conformity to the **manufacturer** marketing the packaged product under its brand: the blister or pouch supplier provides data, but **the brand signs** the [EU declaration of conformity](https://projetcelsius.com/en/blog/ppwr-eu-declaration-of-conformity/).

## What is packaging in contact with the product exempt from?

Packaging in contact with healthcare products is exempt from the 2 requirements demanding the most work from manufacturers: designing recyclable packaging and incorporating recycled plastic.

### Recyclability (Article 6)

Since 12 August 2026, Article 6 has required all packaging to be recyclable under the previous essential requirements until European criteria are established. From 1 January 2030 (or 24 months after those criteria enter into force), packaging must be **designed for recycling** under them, and then recycled at scale from 2035. Paragraph 11 exempts 6 healthcare-related categories from **the entire article**, starting with the **immediate packaging for human and veterinary medicines** and **contact-sensitive packaging for medical devices and IVDs**. Added to these are **a medicine's outer packaging** when necessary to preserve its quality, contact-sensitive packaging for infant formula and **food for special medical purposes**, and packaging for **dangerous goods**.

### Recycled content (Article 7)

Article 7 sets minimum [recycled plastic content](https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/) thresholds for 2030, or 3 years after the act setting out the calculation, with higher levels in 2040. The thresholds are **30% for contact-sensitive polyethylene terephthalate (PET) packaging**, 10% for contact-sensitive packaging made from another plastic and **35% for other plastic packaging**.

Paragraph 4 exempts the same families, with 2 healthcare-specific additions. The first concerns medical devices **intended exclusively for research or under investigation**, the second packaging for supplies and components used to **manufacture a medicine** when required to meet its quality standards. The latter case, such as a bag delivering an excipient to a factory, **is exempt from recycled plastic content but not recyclability**, as Article 6 has no equivalent exemption.

### Outer cartons and grouped packaging boxes: areas requiring documentation

A medicine's outer carton is exempt from recyclability only if **necessary to preserve the product's quality**, for example by protecting a photosensitive medicine from light. **This necessity must be demonstrated**, and the justification belongs in the technical documentation, supported by the marketing authorisation (MA) dossier. A cardboard outer carton remains **outside recycled content thresholds** in any case, since they concern plastic only.

For medical devices, the text exempts contact-sensitive packaging without expressly mentioning the box grouping 100 sterile pouches. As the Commission equates this concept with packaging in immediate contact, the grouped packaging box, and even more clearly the transport packaging, is **very likely subject to all the requirements**.

### The reviews in 2028, 2032 and 2035

None of these exemptions **expires on a fixed date**, but 3 reviews are planned. The **1 January 2028** assessment mainly serves to add recycled content derogations where recycling technology is unavailable. The risk of removal comes from the **12 February 2032** report on retaining recycled content exemptions. It also comes from the review of recyclability exemptions by **1 January 2035** at the latest, which goes through a legislative proposal. Packaging exempt today may therefore **lose its exemption over the coming decade**, a short horizon for any packaging change started now.

> A tablet blister is exempt from recyclability and recycled plastic content, but remains subject to the declaration of conformity, substance limits and minimisation.

## Which other derogations are aimed at healthcare products?

The regulation makes allowances for healthcare on 4 other points, usually subject to conditions.

### Sorting labels, subject to conditions

Article 12 provides for a **harmonised label** showing the packaging's composition to guide sorting. Immediate and outer packaging for human and veterinary medicines, medical devices and IVDs may be exempt from it if there is **no room** for it alongside the mandatory information. The exemption also applies if the label risks **compromising the medicine's safe use**. Commission guidance excludes products reserved for **professional users** as well: a medical device intended for an operating theatre is exempt, while a self-test sold in a pharmacy is exempt only if there is insufficient space. The act establishing the label, expected by 12 August 2026, has not been adopted: the obligation **will not begin before late 2028**.

### Custom transport packaging for medical equipment

A scanner or imaging machine travels in transport packaging designed for it. Article 15 exempts **custom-made transport packaging** for medical devices and configurable medical systems from **technical documentation and the EU declaration of conformity**. Such packaging **remains subject to substantive requirements**. Article 29 also excludes it from reuse targets as packaging designed for large machinery or equipment to the customer's requirements.

### Dangerous goods

Flammable laboratory reagents, biological samples and some IVDs may be transported as **dangerous goods** within the meaning of Directive 2008/68/EC. As soon as a shipment falls into that category, **including in limited quantities**, its packaging is exempt from recyclability, recycled content and reuse targets, as confirmed by the [Commission FAQ](https://environment.ec.europa.eu/publications/faq-packaging-and-packaging-waste-regulation-ppwr_en). **The exemption depends on the goods transported**: packaging approved for dangerous goods does not qualify when carrying an ordinary product.

### Individual portions served in hospitals

From 2030, Annex V bans **single-use plastic individual portions** served on the premises, such as sugar, sauces or coffee cream. **Hospitals, clinics and nursing homes** will be able to continue offering them where necessary for patient safety and hygiene. This is **the annex's only healthcare derogation**; our article on [packaging banned by the PPWR](https://projetcelsius.com/en/blog/ppwr-banned-packaging-formats/) details the other formats.

## Which obligations apply without exemption?

The regulation's core has no healthcare derogation, apart from the documentation exemption for custom packaging. The following obligations **have applied since 12 August 2026 or arrive in 2030**.

### The declaration of conformity and technical documentation

Every packaging type must be covered by **technical documentation** and an **EU declaration of conformity** prepared by the manufacturer and **retained for 5 years**, or 10 years for reusable packaging. Until recyclability criteria are published, the declaration mainly attests to requirements already applicable, particularly substances and heavy metals. It also covers exempt packaging, with the claimed derogation and its justification included in the documentation. Packaging must not bear misleading logos either, and any environmental claim about it is governed by Article 14 and [environmental claims law](https://projetcelsius.com/en/blog/banned-environmental-claims-eu/).

> **Good to know** Article 39 provides, where applicable, for a single declaration when packaging is covered by several European texts requiring one, in the form of a dossier that may bring the declarations together. A medical device manufacturer already required to provide a declaration under Regulation 2017/745 falls into this situation; a medicine authorised through a marketing authorisation rather than a declaration does not.

### Substances of concern, heavy metals and PFAS

Packaging must limit substances of concern, and the sum of lead, cadmium, mercury and hexavalent chromium must not exceed **100 mg/kg**. However, the [PPWR thresholds for per- and polyfluoroalkyl substances (PFAS)](https://projetcelsius.com/en/blog/pfas-food-packaging-ppwr-limits/) concern only food-contact packaging. They do not apply to medicines or medical devices, but do apply to infant milks and oral nutritional supplements prescribed to malnourished patients, which are **legally foods**.

### Minimisation and empty space in 2030

Already required by the previous directive, minimisation is strengthened from 1 January 2030: the weight and volume of every package must be **reduced to the minimum necessary**. No healthcare exemption is provided: pharmaceutical rules or sterility standards serve only as **justification**, criterion by criterion under Annex IV. Commission guidance specifies that **marketing presentation no longer justifies** additional volume. From February 2028, empty space in sales packaging, including outer cartons, must be minimised. Grouped, transport and e-commerce packaging will be limited to **50% empty space** from 2030 at the earliest.

### Reuse of transport packaging

Article 29 requires **40% of transport packaging** (pallets, boxes and crates) to be reusable from 1 January 2030. At the same date, the target is **100% for flows between the operator's own sites** or those of linked or partner enterprises in the EU, as well as deliveries to another company in the same country. Pharmaceutical and hospital logistics are covered **without a specific exemption**, apart from cardboard boxes, dangerous goods and packaging for large machinery. Delegated Decision (EU) 2026/429 of 25 February 2026, in force since 26 May 2026, exempts pallet wrapping and strapping from the 100% target. [MedTech Europe](https://www.medtecheurope.org/resource-library/joint-industry-statement-on-the-new-packaging-and-packaging-waste-regulation/) requests the same treatment for the 40% target. Our article on [reuse under the PPWR](https://projetcelsius.com/en/blog/ppwr-reuse-targets-2030/) details the targets.

### Extended producer responsibility

Finally, healthcare product packaging falls under **extended producer responsibility** (EPR) under Article 45, **with no exclusion for hospital or professional packaging**. The regulation also requires an [EPR authorised representative](https://projetcelsius.com/en/blog/french-epr-authorised-representative/) in each other State where you sell directly to final users without being established there. The Commission's omnibus proposal of 10 December 2025 would suspend this obligation until 2035, **but has not been adopted to date**.

## How long does a packaging change take?

Non-essential outer cartons, boxes and transport packaging must already be recyclable and will be subject to harmonised criteria in 2030. The 2032 and 2035 reviews may extend requirements to immediate packaging, which takes years to change.

### For a medicine: stability and marketing authorisation variation

Any change to a medicine's immediate packaging requires **stability studies and a variation to its marketing authorisation**, country by country. According to estimates published by [Leem (the French pharmaceutical industry association)](https://www.leem.org/sites/default/files/2023-07/Rapport%20de%20synth%C3%A8se%20de%20la%20feuille%20de%20route%203R%20des%20emballages%20plastiques%20%C3%A0%20usage%20unique.pdf) in 2023, with no official schedule of costs, a stability study costs €50,000 to €100,000 and takes 1 to 5 years. The same source puts the time needed to obtain a variation at 6 months to 2 years. A recyclable blister project started in October 2026 would therefore be completed **between 2028 and 2033**. A prescription medicine's outer carton also carries the **anti-tampering device** and unique identifier required by falsified medicines legislation, which also constrains its redesign.

> According to Leem's estimated timescales, a blister change started in October 2026 would be completed between 2028 and 2033, before the review of the exemptions due by 2035 at the latest.

### For a medical device: the sterile barrier

For a sterile medical device, the pouch or tray forms the **sterile barrier system**, validated under EN ISO 11607.

For a device still covered by a certificate under the previous directive, [Medical Device Coordination Group (MDCG) guidance 2020-3](https://health.ec.europa.eu/system/files/2023-09/mdcg_2020-3_en_1.pdf) classifies a packaging design modification affecting the device's sterility, stability or microbiological condition as a **significant change**. This also applies to a modification affecting seal integrity. The rule does not apply if the modification is imposed by other Union legislation without worsening the benefit-risk ratio. A significant change requires the device to be certified under Regulation 2017/745. That assessment most often takes **13 to 18 months**, according to 48% of notified bodies surveyed in [Team-NB's 2025 survey](https://www.team-nb.org/wp-content/uploads/2026/05/Survey-2025.pdf). A change to the grouped packaging box, which does not affect the sterile barrier, has no such consequence.

### The scale of medicine packaging in France

Leem's roadmap puts household medicine packaging placed on the French market at **62,000 tonnes per year** (2022 data), or **1.2% of household packaging**. **Half the plastic consists of blisters**, and **68% of this plastic** had no operational recycling system. The sector has committed to replacing its mono-PVC (polyvinyl chloride)/aluminium blisters with recyclable blisters for suitable products. [Adelphe](https://www.adelphe.fr/toutes-nos-actualites/les-laureats-de-notre-appel-a-projet-vers-un-blister-recyclable/), the household packaging producer responsibility organisation (PRO, éco-organisme in French) supporting healthcare since 2005, has funded trials by 5 pharmaceutical companies since December 2025.

According to The Shift Project (a French climate think tank), packaging production, including leaflets, represents **around 8% of emissions** associated with [medicines consumed in France](https://theshiftproject.org/app/uploads/2026/06/0048_TSP_Medicaments_GB_WEB_Planche.pdf), and packaging manufacture and transport account for **3% of emissions associated with** [medical devices](https://theshiftproject.org/app/uploads/2025/11/TSP-Decarbonons-les-industries-des-DM-Synthese.pdf). A packaging change may therefore shift impacts rather than reduce them, for example with a thicker single-material blister. A [life cycle assessment (LCA) of the device](https://projetcelsius.com/en/blog/medical-device-carbon-footprint-lca/) or a [medicine emission factor](https://projetcelsius.com/en/blog/medicines-carbon-footprint-france-carbon-score/) can test this.

## In France, the PPWR sits alongside EPR and Cyclamed

The regulation does not replace French extended producer responsibility schemes, which determine who pays for managing packaging at the end of its life.

### Household or professional: what the ministerial order of 2 December 2025 determines

France divides packaging between the household packaging scheme and the [professional (business-to-business, B2B) packaging](https://projetcelsius.com/en/blog/france-epr-professional-packaging-2027/) scheme. The [ministerial order of 2 December 2025](https://aida.ineris.fr/reglementation/arrete-021225-relatif-emballages-produits-utilises-menages-etou-professionnels) classifies medicines, consumer dressings, self-tests and first-aid kits **as household products**. It places medicines specifically designed for hospitals, technical dressings, compresses and other medical devices **among professional products**. Transport packaging is professional, **except packaging for online sales to private individuals**; grouped packaging is too, except packs whose units may be sold separately in shops. A ministerial order of 13 July 2026 amended it without changing this classification of healthcare products.

### Professional packaging EPR from 1 January 2027

Postponed several times, most recently from 1 July 2026 to 1 January 2027, the professional packaging scheme becomes operational on **1 January 2027**, according to the environment ministry's press release of 28 July 2026. A manufacturer of hospital medical devices or pharmaceutical company supplying hospitals must join a PRO **before the end of 2026**, or establish an individual compliance scheme, and declare its tonnages to calculate its [EPR fee (éco-contribution)](https://projetcelsius.com/en/blog/french-epr-schemes-list-fees/). If it joins, it can choose from the 3 PROs approved in June 2026: **Citeo Pro, Léko Pro or Twiice**.

### Cyclamed, sorting and the leaflet

[Cyclamed](https://www.cyclamed.org/cyclamed-les-francais-nont-jamais-aussi-bien-trie-leurs-medicaments-non-utilises/), the unused medicines scheme, takes back only **the medicine and its immediate packaging** when medicine remains inside. **Empty outer cartons and leaflets go into separate recycling**, and medical devices and [infectious healthcare waste](https://projetcelsius.com/en/blog/infectious-healthcare-waste-carbon-footprint/) follow other schemes. Its collection rate reached **83% in 2025**. Cartons already bear the Info-tri label required by the French anti-waste law of 2020, with signage shared by Leem, Cyclamed and Adelphe.

## Where to start: an inventory of each packaging item

The safest approach is to work through the packaging bill of materials for each catalogue item and each packaging level, rather than by product family.

- **Classify every packaging level**, from immediate packaging to pallet, and record the derogation claimed and the article providing for it.
- **Document the conditions** of each derogation, such as the outer carton's necessity for medicine quality, insufficient space for the sorting label or a medical device's exclusively professional use.
- **Gather supplier data** on substances and heavy metals, which underpin all declarations of conformity.
- **Identify transport flows** between your sites and to customers in the same country, covered by the 2030 reuse targets.
- **Schedule packaging changes** around stability, marketing authorisation or notified body lead times.

At Projet Celsius, we see the costliest mistake as **interpreting "exempt" as "outside the PPWR"**: outer cartons, grouped packaging boxes and logistics remain covered. By around 2031 at the latest, public procurement must also meet **minimum packaging requirements** established by the Commission (Article 63) where packaging represents more than 30% of the purchase value. A derogation from these requirements is possible on public health grounds. Our [PPWR support](https://projetcelsius.com/en/services/ppwr-compliance/) starts from this inventory, and [packaging eco-design by 2030](https://projetcelsius.com/en/blog/packaging-eco-design-ppwr-2030/) describes the method.

## Key takeaways

- **The PPWR has applied to healthcare products** since 12 August 2026, with no general exclusion.
- **Packaging in contact with the product is exempt** from recyclability and recycled plastic content; outer cartons only if they preserve the medicine's quality.
- **Declarations of conformity, substances, minimisation, reuse and EPR apply** to all healthcare packaging.
- **Exemptions are reviewed by 2032 and 2035**, a short horizon given stability and certification lead times.

The [full PPWR timeline](https://projetcelsius.com/en/blog/ppwr-timeline-deadlines/) places these deadlines alongside the others, and [the regulation's scope](https://projetcelsius.com/en/blog/ppwr-who-is-affected/) helps identify your role as manufacturer, importer or distributor, for each packaging item.

## Frequently asked questions

### Does the PPWR apply to medical devices?

Yes: Regulation (EU) 2025/40 has covered all packaging, including medical device and IVD packaging, since 12 August 2026. Contact-sensitive packaging for the device is exempt from recyclability requirements and, if plastic, recycled plastic content thresholds. Grouped packaging boxes, transport packaging, the EU declaration of conformity, substance limits and minimisation remain subject to the general rules.

### Is medicine packaging exempt from the PPWR?

Only partly: a medicine's immediate packaging, such as a blister or bottle, is exempt from recyclability (Article 6) and recycled plastic content (Article 7). The outer cardboard carton is exempt from recyclability only if necessary to preserve the medicine's quality. The rules for grouped and transport packaging, the declaration of conformity, substance limits and minimisation apply without derogation.

### What is contact-sensitive packaging?

Under Article 3 of the PPWR, it is packaging intended for a product covered by a list of European texts: human and veterinary medicines, medical devices, IVDs, food, cosmetics and food supplements, among others. The concept depends on the category of the packaged product rather than a measurement of contact. It qualifies for lower recycled plastic content thresholds and, for healthcare products, exemptions under Articles 6 and 7.

### How long do healthcare packaging exemptions last?

They have no end date but are reviewed. By 12 February 2032, the Commission provides a report on retaining recycled content exemptions, and by 1 January 2035 at the latest it reviews recyclability exemptions, with a possible legislative proposal. The assessment planned for 1 January 2028 mainly serves to add recycled content derogations where no recycling technology is available.

### Does exempt packaging need a PPWR declaration of conformity?

Yes: the exemptions concern recyclability, recycled content or labelling, rather than the EU declaration of conformity or technical documentation, which have applied since 12 August 2026. The only healthcare-specific documentation exemption covers custom-made transport packaging for configurable medical devices such as a scanner. The derogation claimed and its justification belong in the technical documentation.

### Does hospital packaging fall under professional packaging EPR?

Largely: the ministerial order of 2 December 2025 classifies medicines specifically designed for hospitals, technical dressings, compresses and other medical devices as professional products. It also places most transport and grouped packaging in that category. Medicines sold in pharmacies, self-tests and consumer dressings remain household products. The professional packaging scheme starts on 1 January 2027.

## Sources

- **PPWR regulation**: [Regulation (EU) 2025/40 of 19 December 2024 on packaging and packaging waste](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32025R0040), Official Journal L of 22 January 2025: Articles 2, 3 (definitions, point 49), 5, 6 (paragraphs 11 and 12), 7 (paragraphs 4, 12 and 14), 10, 12 (paragraph 11), 15 (paragraph 11), 24, 25 and Annex V (point 4), 29 (paragraph 4), 39, 45, 63 and 71.
- **European Commission**: [Guidance on Regulation (EU) 2025/40, C/2026/3084](https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084), Official Journal C of 10 June 2026, points 1, 6, 10 and 13; Delegated Decision (EU) 2026/429 of 25 February 2026; [PPWR FAQ](https://environment.ec.europa.eu/publications/faq-packaging-and-packaging-waste-regulation-ppwr_en), August 2026 version.
- **Healthcare product law**: [Directive 2001/83/EC](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32001L0083), Article 1; Regulation (EU) 2019/6; [Regulation (EU) 2017/745](https://eur-lex.europa.eu/eli/reg/2017/745/oj), Annex I; Regulation (EU) 2017/746; Delegated Regulation (EU) 2016/161; [MDCG guidance 2020-3, revision 1](https://health.ec.europa.eu/system/files/2023-09/mdcg_2020-3_en_1.pdf), 2023; EN ISO 11607.
- **French law**: [Ministerial order of 2 December 2025 on packaging of products used by households or professionals](https://aida.ineris.fr/reglementation/arrete-021225-relatif-emballages-produits-utilises-menages-etou-professionnels); environment ministry press release of 28 July 2026 on professional packaging EPR.
- **Sector data**: [Leem, 3R roadmap for single-use plastic packaging](https://www.leem.org/sites/default/files/2023-07/Rapport%20de%20synth%C3%A8se%20de%20la%20feuille%20de%20route%203R%20des%20emballages%20plastiques%20%C3%A0%20usage%20unique.pdf), July 2023; [Adelphe, Towards a recyclable blister call for projects](https://www.adelphe.fr/toutes-nos-actualites/les-laureats-de-notre-appel-a-projet-vers-un-blister-recyclable/), 4 December 2025; [Cyclamed, 2025 review](https://www.cyclamed.org/cyclamed-les-francais-nont-jamais-aussi-bien-trie-leurs-medicaments-non-utilises/), 26 June 2026; [MedTech Europe, joint statement on Article 29](https://www.medtecheurope.org/resource-library/joint-industry-statement-on-the-new-packaging-and-packaging-waste-regulation/), 16 March 2026; [Team-NB, 2025 survey](https://www.team-nb.org/wp-content/uploads/2026/05/Survey-2025.pdf), May 2026.
- **Carbon footprint**: The Shift Project, [pharmaceutical industry summary](https://theshiftproject.org/app/uploads/2026/06/0048_TSP_Medicaments_GB_WEB_Planche.pdf), June 2025, English version, and [medical device industries summary](https://theshiftproject.org/app/uploads/2025/11/TSP-Decarbonons-les-industries-des-DM-Synthese.pdf), June 2025.
