---
title: "PPWR recycled plastic: the mandatory thresholds"
description: "Plastic packaging needs 10-35% recycled content from 2030. See the four PPWR thresholds and why sourcing post-consumer plastic starts in 2026-2027."
canonical: https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/
author: "Sébastien Pierfederici"
datePublished: 2026-06-09
dateModified: 2026-09-02
language: en
translationOf: https://projetcelsius.com/blog/ppwr-taux-plastique-recycle/
---

# PPWR recycled plastic: the mandatory thresholds

**Author**: Sébastien Pierfederici
**Published**: 2026-06-09
**Updated**: 2026-09-02
**Section**: Regulation
**Canonical URL**: https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/
**French original**: https://projetcelsius.com/blog/ppwr-taux-plastique-recycle/
**Source**: Projet Celsius (https://projetcelsius.com/en/), a climate strategy consultancy of engineers and PhDs based in Paris and Marseille.

> The **Packaging and Packaging Waste Regulation (PPWR)** (European [Regulation 2025/40 on packaging](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/)) requires minimum **recycled plastic content** in plastic packaging placed on the EU market, subject to exemptions, from **1 January 2030** (later if the calculation methodology is delayed): from 10 to 35% depending on the category, rising to as much as 65% in 2040. The applicable threshold is quick to identify. Securing recycled material that meets it takes years: contracts are signed from **2026-2027**.

## Key takeaways

- **From 2030, plastic packaging placed on the EU market** must contain recycled plastic, subject to exemptions.
- **Only recyclate from collected waste counts**: factory scrap contributes nothing towards the requirement.
- **Four thresholds in 2030, from 10 to 35%**, rising to as much as 65% in 2040.
- **Qualifying a recycled material supplier takes 6 to 12 months**: contracts are signed in 2026-2027.

You have come across recycled plastic content and the acronym **PPWR** (Packaging and Packaging Waste Regulation) in a specification or packaging meeting, with a sense that it affects you but no clear idea how. The short answer: if your company sells products packaged in plastic on the European market, you are affected. From **1 January 2030**, or later if the calculation methodology is delayed, most plastic packaging will have to contain a minimum proportion of **recycled plastic**, from 10 to 35% depending on its category and up to 65% in 2040.

The selector below gives the threshold for each packaging type. The rest of the article puts the obligation in context: where it comes from and who it covers, which material counts (your factory scrap does not), the risks for non-compliant packaging and why **sourcing recycled material** starts in 2026-2027.

## When does the PPWR start requiring recycled plastic?

The **PPWR** (Packaging and Packaging Waste Regulation) is [Regulation (EU) 2025/40](https://eur-lex.europa.eu/eli/reg/2025/40/oj) on packaging and packaging waste. It entered into force on 11 February 2025 and has applied since **12 August 2026**, replacing the 1994 directive and applying as written across the 27 Member States. Our [packaging regulation guide](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/) provides an overview; this article examines the requirement with the greatest impact on purchasing: **Article 7**, minimum recycled content in plastic packaging.

From **1 January 2030**, any plastic part of packaging placed on the European market will have to contain a minimum percentage of recycled plastic, set by category and then increased on **1 January 2040**. Packaging manufacturers and importers demonstrate conformity, but the obligation extends to every brand selling packaged products: [the producer test](https://projetcelsius.com/en/blog/ppwr-who-is-affected/) applies here too.

This obligation has a precedent: since 2025, the [Single-Use Plastics Directive](https://eur-lex.europa.eu/eli/dir/2019/904/oj) has already required **25% recycled content in polyethylene terephthalate (PET) bottles**. The PPWR extends this approach, with an explicit objective: creating **guaranteed demand for recycled material** so that collection and recycling systems have a stable market.

## The 4 thresholds by packaging type: 2030, then 2040

Article 7 defines **4 categories** of plastic packaging, each with its 2030 threshold and 2040 level. To classify a catalogue item, 2 questions are enough: is it a single-use beverage bottle? If not, is the packaging **contact-sensitive**, meaning intended for a product whose safety is regulated: food, cosmetics, medicines, medical devices or animal feed?

### The 4 thresholds, from 10 to 35% in 2030

- **Single-use beverage bottles**: 30% in 2030, 65% in 2040. This category has the most mature recycling system.
- **Contact-sensitive PET packaging** (trays, pots and films): 30% in 2030, 50% in 2040.
- **Contact-sensitive packaging made from other plastics** (polypropylene (PP), high-density polyethylene (HDPE) and multilayers): 10% in 2030, 25% in 2040. This is the lowest threshold because of the lack of compliant material.
- **All other plastic packaging** (films, containers, void fill and transport packaging): 35% in 2030, 65% in 2040. This is the highest initial threshold.

The differences reflect how mature the recycling systems are: 30% for PET, where food-grade recycling has long operated at industrial scale, and 10% for other contact-sensitive polymers, where material suitable for contact remains unavailable at scale. The Union is also applying the same mechanism elsewhere: the [Battery Regulation](https://projetcelsius.com/en/blog/eu-battery-regulation-2023-1542/) will require its own recycled material percentages from 2031.

### Percentages are averaged per plant and year, rather than assessed per bottle

The percentages are assessed **as an average per manufacturing plant and year**, for each packaging type and format: a catalogue item may fall below the threshold if another, produced in the same plant, exceeds it enough to compensate. The official calculation methodology will be set in an **implementing act expected by 31 December 2026**. If it is delayed, the 2030 deadline moves accordingly, as the regulation provides. Be cautious about building an offsetting strategy around unpublished rules.

### Exempt packaging

The thresholds do not cover packaging for **medicines** and **medical devices**, packaging for **infant** food, transport of **dangerous goods**, **compostable** plastic packaging or any plastic part representing **less than 5% of the packaging's total mass**. The compostable exemption does not resolve everything: our [review of bioplastics](https://projetcelsius.com/en/blog/bioplastics-market-2026-strategy-mistakes/) and [guide to eco-design with bioplastics](https://projetcelsius.com/en/blog/eco-design-with-bioplastics/) explain the pitfalls.

## Which recycled plastic counts towards the rate?

The regulation does not require recycled plastic in general: it requires recycled content recovered from **post-consumer plastic waste**, meaning plastic that has been placed on the market, used, discarded, collected and reprocessed. The industry calls this **PCR** (post-consumer recycled). A bottle from France's yellow recycling bin reprocessed into pellets falls within this definition.

By contrast, **PIR** (post-industrial recycled) means production scrap reground at the end of the line: injection runners, film trimmings and quality rejects. This material is clean, available and easy to reincorporate, but **counts for zero** under Article 7 because it has never left the industrial circuit or reduced waste in anyone's bin. A company claiming 30% recycled content through its own scrap therefore starts from zero under the PPWR and still needs to secure its full recycled material supply.

The regulation adds a traceability requirement: the material must have been **collected and recycled to European standards**, in the EU or a third country applying equivalent rules, with documentary evidence. One final point to watch: displaying 30% recycled plastic on the pack is an environmental claim [that requires proof](https://projetcelsius.com/en/blog/green-claims-what-empco-bans/), and the [Empowering Consumers for the Green Transition (EmpCo) Directive](https://projetcelsius.com/en/blog/what-is-empco-directive/) specifically tightens this framework on 27 September 2026.

## What is the risk for packaging below the threshold in 2030?

The PPWR is a **market access regulation**, following the model of the [Ecodesign for Sustainable Products Regulation (ESPR)](https://projetcelsius.com/en/blog/espr-ecodesign-regulation-guide/) for products. Packaging below its threshold on 1 January 2030 **can no longer be placed on the market**, simultaneously in the 27 Member States. Market surveillance authorities may require the technical documentation demonstrating the percentage (Annex VII to the regulation) and order **withdrawal of non-compliant batches**. For a high-volume catalogue item, the cost can run to millions of euros.

> From 2030, or later if the implementing act on the calculation methodology is delayed, packaging below its recycled content threshold can no longer be placed on the European Union market.

Even before 2030, recycled content becomes a financial factor: the regulation allows extended producer responsibility fees (EPR fees, éco-contributions), paid in France to [Citeo](https://www.citeo.com/) (a French producer responsibility organisation, or éco-organisme), to be **modulated** according to recycled content: more recyclate, lower fees. These data will also feed into the future [Digital Product Passport (DPP)](https://projetcelsius.com/en/blog/digital-product-passport-explained/). The [PPWR deadline timeline](https://projetcelsius.com/en/blog/ppwr-timeline-deadlines/) puts these dates alongside the other obligations, including [formats banned in 2030](https://projetcelsius.com/en/blog/ppwr-banned-packaging-formats/).

## Sourcing recycled material

Knowing your threshold does not solve the hardest problem: finding material that meets the specifications, in the required volumes and at an industrially viable cost. The PCR market is young and varies considerably by polymer. For **bottle-grade PET**, the European recycling system exists and is growing; **mandatory deposit return in 2029**, with its 90% collection target, will further increase the available waste stream. For flexible plastics, multilayers and contact-sensitive polymers other than PET, qualified supply is **scarce**, and every European producer will seek it at the same time.

In our projects, **qualifying a PCR supplier takes 6 to 12 months**: tracing the waste stream, ensuring suitability for contact where relevant, approving the pellets and scaling up. Often the packaging itself must also be redesigned, because recycled content changes its mechanical and barrier properties. A structured [eco-design process](https://projetcelsius.com/en/blog/eco-design-process-7-steps/) avoids discovering this in production. The indicative cost we observe for a prioritised portfolio redesign including supplier qualification is **€30,000 to €100,000** over 6 to 12 months.

These lead times determine the contracting window: manufacturers wanting supply in 2030 sign their PCR contracts in **2026-2027**, while the official methodology is being published and supply is still available. At Projet Celsius, we see waiting until 2029 as the most expensive scenario: it is the year when the whole market will be ordering the same material, at a premium and with qualification lead times that cannot be shortened. Sourcing is managed alongside redesign: our [packaging eco-design method](https://projetcelsius.com/en/blog/packaging-eco-design-ppwr-2030/) sets out the full sequence.

> Achieving 30% recycled content in 2030 depends on a qualified PCR supply, and qualification takes 6 to 12 months.

## Who decides on the food-contact derogation?

Does contact with food mean my packaging is exempt? No, not in principle. The regulation provides 2 safeguards, neither of which manufacturers can trigger themselves. The first concerns health: the thresholds do not apply if the recyclate **threatens human health** or the conformity of the packaged product. The second concerns technology: on **1 January 2028**, the Commission will assess whether derogations are needed where **no authorised recycling technology is sufficiently available**, solely for contact-sensitive packaging other than PET and the other packaging category.

For **food-contact PET**, the question is already settled: recycling processes have been [authorised at European level](https://eur-lex.europa.eu/eli/reg/2022/1616/oj) since Regulation 2022/1616, so no derogation is expected. For food-contact polypropylene (PP) or polyethylene (PE), a derogation remains possible but will come through a **Commission delegated act**, rather than an individual application. Building a 2030 strategy around a hypothetical derogation means staking market access on a decision outside your control; evaluating material alternatives now with a [first life cycle assessment (LCA) for eco-design](https://projetcelsius.com/en/blog/first-product-lca-steps-cost-mistakes/) is a much safer approach.

> **When the thresholds may change** The 2040 level has a review clause: by 12 February 2032, the Commission will publish a report on implementation of the 2030 thresholds and feasibility of the 2040 thresholds, which may lead to their revision. The 2030 thresholds will change only in the event of a severe shortage, through a delegated act.

## Our view at Projet Celsius

The debate focuses on thresholds of 10, 30 or 35%, but the constraint is the **available waste stream**. High-quality, certified post-consumer recycled material, particularly for food contact, is scarce and in demand, and 2030 volumes are already earmarked for the first companies to sign contracts.

Our view as practitioners is that PCR content is decided in **2026-2027**, when a multi-year supply is secured. The first action is to **map your plastic packaging items** and qualify a recyclate supplier before the material is committed elsewhere.

## Key takeaways

- **4 thresholds from 1 January 2030**: beverage bottles 30%, contact-sensitive PET 30%, contact-sensitive other plastics 10% and other packaging 35%, rising to as much as 65% in 2040.
- **Only post-consumer recyclate (PCR) counts**: reground production scrap counts for zero under the regulation.
- **The percentage is an average per plant and year**; the official calculation methodology arrives at the end of 2026.
- **The food-contact derogation is in the Commission's hands**, and food-contact PET will not qualify.
- **Qualifying a PCR supplier takes 6 to 12 months**: the useful contracting window is 2026-2027, rather than 2029.

Recycled content is a sourcing constraint that requires preparation years ahead. The first action is to place each catalogue item in its category, assign its 2030 threshold and compare that threshold with the PCR available from your suppliers. The [complete PPWR guide](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/) explains how this obligation fits alongside the regulation's other requirements.

## Frequently asked questions

## Frequently asked questions

### What is the PPWR?

The Packaging and Packaging Waste Regulation, or Regulation (EU) 2025/40: the European text governing all packaging placed on the Union market since 12 August 2026. Its requirements include packaging recyclability, bans on packaging formats, reuse targets and, from 2030, minimum recycled plastic content by packaging category.

### What recycled content does the PPWR require in 2030?

Four thresholds from 1 January 2030: 30% for single-use beverage bottles, 30% for contact-sensitive PET packaging, 10% for contact-sensitive packaging made from other plastics and 35% for all other plastic packaging. In 2040, these thresholds rise respectively to 65%, 50%, 25% and 65%.

### Does reground production scrap count towards the percentage?

No. The regulation counts only recyclate from post-consumer plastic waste (PCR), meaning waste collected after use. Factory scrap and rejects reincorporated internally (PIR) count for zero: a company claiming 30% recycled content through its own scrap starts from zero under the PPWR.

### Is food-contact packaging exempt?

No, not in principle. The thresholds apply, with two safeguards: a health exception if recyclate threatens the packaged product's safety and possible derogations decided by the Commission following its assessment on 1 January 2028, solely for contact-sensitive packaging other than PET and other packaging. Food-contact PET, whose recycling processes have been authorised since 2022, will not qualify.

### When should I start sourcing recycled material?

Now, if the target deadline is 2030: qualifying a PCR supplier takes 6 to 12 months, packaging redesign takes up to 24 months, and qualified supply outside PET is scarce. The useful contracts are signed in 2026-2027; waiting until 2029 means ordering at the same time as the entire market.

### Is recycled content calculated per package or across all my production?

It is assessed as an average per manufacturing plant and year for each packaging type and format. A catalogue item may therefore fall below its threshold if another, produced in the same plant and category, exceeds it enough to compensate. The official calculation methodology will be set in an implementing act expected by 31 December 2026 at the latest, and Regulation (EU) 2025/40 provides for the 2030 deadline to move accordingly if this act is delayed. It is better to wait for publication before building an offsetting strategy between catalogue items.

### Which packaging is exempt from recycled content thresholds?

Regulation (EU) 2025/40 excludes packaging for medicines and medical devices, packaging for infant food, packaging for transporting dangerous goods and compostable plastic packaging. A plastic part representing less than 5% of the packaging's total mass is also outside the thresholds. These exclusions do not exempt it from the text's other requirements, particularly packaging recyclability required from 1 January 2030.

### How can I prove my recycled content during an inspection?

Through the packaging's technical documentation, whose contents are specified in Annex VII to Regulation (EU) 2025/40 and which market surveillance authorities may require. It must establish that the material comes from post-consumer plastic waste collected and recycled to European standards, in the Union or a third country applying equivalent rules. In practice, this involves supplier declarations, waste stream traceability and certificates from the reprocessor. This supporting evidence is negotiated during supplier qualification, which takes 6 to 12 months.

### How much does it cost to make a plastic packaging portfolio compliant?

The observed indicative cost for a prioritised redesign, including qualification of a recycled material supplier, is €30,000 to €100,000 over 6 to 12 months. This covers design and qualification work, excluding the material premium and industrial trials, which depend on the polymer and volumes involved. Internal staff time in purchasing, quality and production must also be added. Costs rise when recycled content requires changes to the packaging's mechanical or barrier properties.
