---
title: "PPWR timeline: when does the regulation apply, and how long does the timetable run?"
description: "PPWR timeline: in force since February 2025, fully applicable since 12 August 2026, with a key deadline on 1 January 2030 and the later stages."
canonical: https://projetcelsius.com/en/blog/ppwr-timeline-deadlines/
author: "Sébastien Pierfederici"
datePublished: 2026-06-09
dateModified: 2026-10-31
language: en
translationOf: https://projetcelsius.com/blog/ppwr-calendrier-echeances/
---

# PPWR timeline: when does the regulation apply, and how long does the timetable run?

**Author**: Sébastien Pierfederici
**Published**: 2026-06-09
**Updated**: 2026-10-31
**Section**: Regulation
**Canonical URL**: https://projetcelsius.com/en/blog/ppwr-timeline-deadlines/
**French original**: https://projetcelsius.com/blog/ppwr-calendrier-echeances/
**Source**: Projet Celsius (https://projetcelsius.com/en/), a climate strategy consultancy of engineers and PhDs based in Paris and Marseille.

> **The PPWR (Packaging and Packaging Waste Regulation)**, the [EU packaging regulation](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/), has been **in force since 11 February 2025** and fully applicable since **12 August 2026**. The main deadline is **1 January 2030**, and its quantified requirements are phased in through to 2040. As a regulation, it applies without any French implementing law.

## Key takeaways

- **The PPWR has already been adopted**: in force since February 2025, applicable since 12 August 2026.
- **No national law is required**, in France or elsewhere: a regulation applies directly in all 27 Member States.
- The only date to remember is **1 January 2030**, when everything begins to shift.
- **Redesigning packaging takes 6 to 18 months**, which is a reason to start now.

The Packaging and Packaging Waste Regulation (PPWR) is **already in force**, but its quantified requirements **take effect in waves** through to 2040. The timeline below sets them all out. The main date is **1 January 2030**.

The sections below set out the timetable date by date, then the time left to act. For the regulation as a whole, see the [complete guide to the PPWR](https://projetcelsius.com/en/blog/ppwr-packaging-regulation-guide/).

## Is the PPWR already adopted and in force?

### A regulation in force since 11 February 2025

**Regulation (EU) 2025/40** was adopted on 19 December 2024, published in the Official Journal of the European Union on 22 January 2025 and **entered into force on 11 February 2025**. It is therefore part of the law in force. It **replaces [Directive 94/62/EC](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31994L0062)**, which had governed packaging since 1994, and has been **fully applicable since 12 August 2026**.

### Does the PPWR need a national law, in France or elsewhere, to apply?

This is the main difference from a directive such as [EmpCo](https://projetcelsius.com/en/blog/empco-application-dates/), on empowering consumers for the green transition: a **regulation applies directly** and identically in all 27 Member States, without national transposition. No French law is needed for it to take effect; France only sets the **penalty regime**, which is still being developed (DGPR, the French risk prevention directorate; ADEME, the French Agency for Ecological Transition; DGCCRF, the French consumer protection authority). Waiting for a law before beginning preparations would misread the legislation.

## Which dates matter in the PPWR timeline?

The legislation introduces its obligations in successive stages. 6 milestones, 1 of them French, set the timetable, and a single date carries most of the requirements.

### Why the stages extend through to 2040

The PPWR phases in its obligations to give the sectors involved time to develop recycling, deposit and return systems and the supply of recycled material. The dates therefore run from the documentary requirement to product redesign:

- On the French side, since **10 July 2026**, every producer not established in France has had to appoint an authorised representative there for extended producer responsibility (EPR) ([Article L. 541-10-9-1 of the French Environmental Code](https://www.legifrance.gouv.fr/codes/article_lc/LEGIARTI000054403121/2026-07-10), Law No. 2026-602 of 8 July 2026). This national obligation is separate from the PPWR but covers the same subject, and it anticipates Article 45 of the regulation without transposing it. [See our dedicated article for the details](https://projetcelsius.com/en/blog/french-epr-authorised-representative/).
- **12 August 2026** marks the full application of the regulation. Each packaging item must be covered by a **declaration of conformity**, and the first [**PFAS (per- and polyfluoroalkyl substances) limits**](https://projetcelsius.com/en/blog/pfas-food-packaging-ppwr-limits/) for food-contact packaging apply. Anyone selling outside their country of establishment must also appoint an **EPR authorised representative** in each relevant country ([Article 45](https://eur-lex.europa.eu/eli/reg/2025/40/oj?locale=en#art_45)). **Registration in the national register of producers** ([Article 44](https://eur-lex.europa.eu/eli/reg/2025/40/oj?locale=en#art_44)) will follow: each Member State must set up this register within 18 months of the Commission's implementing act on its format. Existing registers, such as SYDEREP (ADEME's French register for producer responsibility declarations), apply in the meantime.
- On **12 August 2028**, **harmonised labelling** for sorting at source, common to all 27 Member States, starts to apply, or 24 months after the implementing act that defines it if that act comes later (Article 12). As this act had not been adopted by the end of October 2026 and is expected in the second quarter of 2027, the deadline moves to after the end of 2028.
- **1 January 2029** is the date on which **deposit and return systems** for plastic bottles and cans are introduced. A derogation is provided for a Member State whose separate collection reached 80% in 2026 and which submits a plan to reach 90%.
- On **1 January 2030**, the one date to remember, the [banned formats](https://projetcelsius.com/en/blog/ppwr-banned-packaging-formats/) in Annex V and the first [reuse targets](https://projetcelsius.com/en/blog/ppwr-reuse-targets-2030/) start to apply. Recyclability of all packaging, [recycled plastic content](https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/) and the 50% empty space ratio follow on that date **at the earliest**, and later if the Commission's implementing acts are delayed.
- From **2035 to 2040**, the standards become stricter in stages. The regulation requires actual recycling in 2035 and ends recyclability grade C in 2038. In 2040, the recycled content thresholds become final (25 to 65%) and higher reuse targets are aimed for.

One deadline also remains politically uncertain. A Commission proposal, the environmental omnibus, would suspend the **European** authorised representative obligation until 2035 for producers established in the Union. It has not been adopted: after work stalled in spring 2026, the Parliament (20 October) and the Council (21 October) adopted differing positions on exempting small producers, and the authorised representative obligation applies. The Council had cited the strong reservations of a large majority of Member States and the review of EPR schemes planned under the future circular economy regulation, expected in autumn 2026. The proposal does not cover the French requirement of 10 July 2026, whose relationship with the European legislation has not been settled.

## Are you already exposed before the 2030 PPWR deadline?

### A declaration of conformity is already required

Since **12 August 2026**, each packaging type has been required to have an [**EU declaration of conformity**](https://projetcelsius.com/en/blog/ppwr-eu-declaration-of-conformity/). It is a document signed on behalf of the manufacturer and supported by technical documentation, and it can be presented to any market surveillance authority. It is retained for **5 years** for single-use packaging and **10 years** for reusable packaging. The regulation provides for no CE marking for packaging (recital 109). To find out who signs it, see [who is affected](https://projetcelsius.com/en/blog/ppwr-who-is-affected/).

### Why the work starts before 2030

1 January 2030 is the **date a requirement becomes enforceable**, and the **date a decision is needed** falls well before it. Redesigning packaging, qualifying a recycled material supplier or setting up a reuse loop takes months, sometimes years. Work on a product reference that would be non-compliant on 1 January 2030 starts in 2026-2027, not on 31 December 2029.

## How much time is left before the PPWR compliance deadline?

How much time you need depends on the work involved. 3 cases cover most situations.

### You are redesigning plastic packaging

Redesigning packaging, from specifications and sourcing to performance testing, industrial validation and production line changeover, takes **6 to 18 months** in our experience on client engagements. To meet the 1 January 2030 deadline, you need to make the decision during 2027 at the latest. Our [packaging eco-design method](https://projetcelsius.com/en/blog/packaging-eco-design-ppwr-2030/) sets out the sequence of **inventory, measurement and supplier qualification**.

### You need to source recycled material

Qualifying a supplier of post-consumer [recycled plastic](https://projetcelsius.com/en/blog/ppwr-recycled-plastic-content-targets/) takes **6 to 12 months** based on our project experience, and certified volumes are in high demand. Contracts are signed in 2026-2027 to secure the material needed for 2030.

### You are setting up a reuse loop

This takes the longest: a [reuse system](https://projetcelsius.com/en/blog/ppwr-reuse-targets-2030/), including a stock of containers, return logistics and washing, has to be prepared well before 2030.

## Our view at Projet Celsius

In our view, the decisive date is **1 January 2030** rather than 12 August 2026, for 2 reasons. The quantified requirements start to apply from that date, and packaging redesign cycles are measured in years.

As practitioners, we are convinced that the timetable needs to be **reversed**, starting from 2030 and working back. The first building block, a no-regret move whatever happens next, is the **inventory of packaging by product reference**, which immediately shows which product references clear the bar and which fall short. From there, each project is given its decision date, and the 2030 deadline is broken down into a roadmap. [Celsius's PPWR support](https://projetcelsius.com/en/services/ppwr-compliance/) makes it possible to organise this inventory, the documentation and the responsibilities within a work schedule.

## Key takeaways

- **The PPWR has been in force since February 2025** and fully applicable since 12 August 2026.
- **No French law is required**: a regulation applies directly in all 27 Member States.
- The only date to remember is **1 January 2030**. The banned formats and the first reuse targets start to apply on that date, and recyclability and recycled content follow on that date at the earliest.
- **The standards become stricter through to 2040**, but redesign lead times mean project decisions are made in 2026-2027.

A useful habit is to **start from 2030 and work backwards**. Identify your product references at risk, set a date for each project and deal first with whatever has the longest lead time (recycled material sourcing, a reuse loop).

## Frequently asked questions

### Is the PPWR already in force?

Yes. Regulation (EU) 2025/40 entered into force on 11 February 2025 and has been fully applicable since 12 August 2026. Most quantified requirements apply from 1 January 2030 (banned formats from that date, recyclability and recycled content at the earliest from that date), then increase in stages through to 2040.

### Do I need to wait for a French law before the PPWR applies to me?

No. The PPWR is an EU regulation: it applies directly and identically in all 27 Member States, without transposition. Only the penalty regime is set nationally, and it is still being developed in France. The legislation takes effect on the specified dates, whether or not there is a French law.

### What is the most important PPWR deadline?

1 January 2030. This is when the quantified requirements start taking effect: the banned formats in Annex V and the first reuse targets apply on that date, while recyclability of all packaging, recycled plastic content and the empty space ratio apply no earlier than that date. 12 August 2026 initially requires only a documentary declaration of conformity.

### Which PPWR requirements apply before 2030?

The declaration of conformity has been required for each packaging type since 12 August 2026, alongside the first PFAS limits for food-contact packaging; harmonised labelling applies no earlier than the end of 2028 and deposit and return systems in 2029. The 50% empty space ratio for e-commerce applies no earlier than 1 January 2030.

### Why start preparing for the PPWR before 2030?

Because redesigning packaging takes 6 to 18 months, qualifying a recycled material supplier takes 6 to 12 months, not counting the time needed to set up a reuse loop. Compliance on 1 January 2030 is decided in 2026-2027, not at the end of 2029. The method is therefore to start from the deadline and work backwards.

### Do I need an authorised representative in every European country where I sell without a subsidiary?

Yes, since 12 August 2026. Article 45 of Regulation (EU) 2025/40 requires you to appoint an authorised representative for extended producer responsibility in each Member State where you sell without being established there. Article 44 adds registration in those countries' national registers of producers, which each Member State must set up within 18 months of the Commission's implementing act on its format. Existing registers apply in the meantime. Selling from France to Germany, Spain and Italy therefore requires 3 separate appointments and 3 separate registrations. A Commission proposal, the environmental omnibus, would suspend this obligation until 2035 for producers established in the Union, but it has not been adopted: the Parliament (20 October 2026) and the Council (21 October 2026) adopted differing positions on exempting small producers, and the authorised representative obligation applies.

### Is France's 10 July 2026 obligation the same as the PPWR authorised representative requirement?

No: these are 2 separate obligations. The French obligation stems from Article L. 541-10-9-1 of the French Environmental Code, created by Law No. 2026-602 of 8 July 2026: since 10 July 2026, every producer not established in France has had to appoint an authorised representative there for extended producer responsibility, across all EPR schemes, rather than packaging alone. The PPWR has provided for a comparable obligation across Europe since 12 August 2026, through Article 45. The relationship between the 2 texts has not yet been settled.

### What fines apply if packaging does not comply with the PPWR?

Regulation (EU) 2025/40 does not specify fine amounts: Article 68 requires Member States to define the penalty regime. In France, this was still being developed in early September 2026 (DGPR, ADEME, DGCCRF), with no published fine schedule. The most tangible risk is commercial: packaging that does not comply with the applicable requirements cannot be placed on the European market, and market surveillance authorities may require the technical documentation and then order the withdrawal of the batches concerned, with a significant impact on a high-volume product reference.

### What happens after 2030 in the PPWR timeline?

The timetable does not end there: the requirements become stricter in stages through to 2040. In 2035, the regulation requires recycling to take place, rather than packaging merely being designed for recycling. In 2038, recyclability grade C disappears, raising the minimum standard. In 2040, the final recycled content thresholds apply, ranging from 25 to 65% depending on the packaging category, and reuse targets rise. Packaging designed merely to meet the 2030 threshold therefore risks needing another redesign before 2040.

## Sources

**Sources**: Regulation (EU) 2025/40 (PPWR), [official text on EUR-Lex](https://eur-lex.europa.eu/eli/reg/2025/40/oj); [Directive 94/62/EC](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31994L0062) (repealed). The French penalty regime is still being developed (DGPR, ADEME, DGCCRF). The page of Légifrance (the French government's official legal database) is in French.
